Nordson AltaBlueA4TP - Page 66

I/O connectors (labeled 1-10 and
11-20)
Installation
3-38
Part 1107600_03
 2014 Nordson Corporation
Installing Melter Outputs (contd)
See Figure 3‐7.
2. Connect each pair of output wires to the appropriate terminals (1 through
8) on the 1-10 I/O connector. The connector is preinstalled on terminal
XT7 on the I/O expansion card. Table3‐8 lists the terminal numbers that
correspond to each output.
11-20
1-10
Outputs
Inputs
7
10
9
8
7
6
5
6
5
4
Figure 3-7 Wiring outputs