Installation
3-9
Part 237478_03
E 2012 Nordson Corporation
6. Connect the polyethylene air line tubing to the fitting on the
high‐temperature air line tubing.
1
2
3
4
Figure 3‐6 Connecting the Gun to the Air Line Tubing
1. Polyethylene air line tubing
2. High‐temperature air line fitting
3. High‐temperature air line tubing
4. Air line elbow red collar
7. Place hose clamps (included in the installation kit) every 60 cm (2 ft)
around the hydraulic hose and air line, working from thegun end of the
hydraulic hose to the applicator end.
Figure 3‐7 Installing a Hose
Clamp
To Next Page
Loading...
