Nortek 2GIG eSeries GC2e - Page 62

GC2e Wireless Security System | Installation and Programming Guide
©2020 Nortek Security & Control LLC. All rights reserved. 60 2GIG is a registered trademark of Nortek Security & Control LLC.
12. At the Conrmaon screen, tap OK.
13. At the Toolbox (2 of 3) screen, tap Set Time. Then use the
↓ and ↑ arrows to set the hours, minutes, and AM/PM.
When done, tap OK.
Figure 56
Select Time Screen
14. At the Conrmaon screen, tap OK.
• To return to the Security screen, tap Back.
OR
• To return to the Home screen, press
.
11. At the Toolbox (2 of 3) screen, tap Set Date. Then use the
↓ and ↑ arrows to set the month, day, and year. When
done, tap OK.
Figure 55
Set Date Screen
Final Installation Setup