GC2e Wireless Security System | Installation and Programming Guide
©2020 Nortek Security & Control LLC. All rights reserved. 65 2GIG is a registered trademark of Nortek Security & Control LLC.
Commercial Regulatory Listings
IMPORTANT: When used with the Alarm.com service, this security system has been evaluated and complies with UL 1610: Central‐
Staon Burglar‐Alarm Units. It has not been evaluated for UL 864: Control Units and Accessories for Fire Alarm Systems and UL
1076: Proprietary Burglar Alarm Units and Systems. For commercial installaons (UL 1610), only one method of communicaon is
to be used, this method of communicaon is a LTE (Cellular) Radio Module. See “LTE (Cellular) Radio Module” on page 15.
IMPORTANT: If this installaon is a commercial installaon, please inform the customer (or end user) that commercial Control
Panels are for use only as burglar alarm systems and not for re protecon.
NOTE: The standard backup baery that is included with all 2GIG Control Panels does not support UL 985 installaons. To comply
with the secondary supply requirement in UL 985 Household Fire Warning System Units, you must install the 2GIG Console Baery
Pack (2GIG-BATT2X).
IMPORTANT: All conductors and aachments are manufactured in accordance with the Standard for UL 681: Installaon and
Classicaon of Burglar and Holdup Alarm Systems. The Control Panel contains hard wiring that is protected and not exposed. All
conductors and aachments are manufactured in accordance with the UL 681: Installaon and Classicaon of Burglar and Holdup
Alarm Systems.
Stranded conductors clamped under wire-binding screws or similar parts shall have the individual strands soldered together or
arranged in a construcon that has been determined to be the equivalent.
IMPORTANT: A local alarm sounding device, alarm housing, and control unit shall comply with the mercanle requirements in UL
365: Police Staon Connected Burglar Alarm Units and Systems.
Regulatory Information
To Next Page
Loading...
