文件编号：NR-TP-0715-008 版本：1.0
- 20 -
menu operations, including confirmation and cancel key.
4.2 User Setup
The common setup of the monitor is the general setup that defines how the monitor works,
for example: alarm volume setting. They may affect the setup of multiple measurements or
display interfaces.
4.2.1 Defining the Monitor
When install the monitor or change the usage occasion, the monitor should be defined as
follows:
Select [Menu] Smart Hotkey→[Main Menu];
Select [User Maintenance >>] →enter the password and confirm → [User Maintenance]
menu;
Select [Device Name]: Enter device name through the soft keyboard on the screen.
Select [Department]: Enter the sector and department using the device through the
soft keyboard on the screen.
Select [Bed No.]: Enter the bed number through the soft keyboard on the screen.
4.2.2 Language Setup
Set the monitor language in the following steps:
Select [Menu] Smart Hotkey→[Main Menu];
Select [User Maintenance >>] →enter the password and confirm → [User Maintenance]
menu;
Select [Language], and select the option as needed:
[English]: The interface language of the monitor is English.
[Spanish]: The interface language of the monitor is Spanish.
4.2.3 Date and Time
To Next Page
Loading...