文件编号：NR-TP-0715-008 版本：1.0
- 72 -
Before cleaning the monitor or sensor, turn off the power and disconnect the AC
power.
The monitor should be kept clean. It is recommended to regularly clean the
enclosure surface and the display screen. Cleaning the enclosure with non-etching
cleaners such as soap and water.
Caution
To avoid damaging the monitor:
Do not use strong solvents such as acetone.
Most cleaners must be diluted before use. Dilute according to the
manufacturer's instructions.
Do not use abrasive materials (such as steel wool).
Do not allow any liquid entering into the enclosure, and never immerse any
part of the device into liquid.
Do not leave any cleaning solution on the surface of any part of the device.
Notes
Wipe the monitor and sensor surface with medical alcohol, dry it naturally or with
clean, dry, lint-free cloth.
Northern is not liable for effectiveness of using these chemicals for infectious
disease control. Please consult the infectious disease control officers or experts of
the hospital for advice.
14.3 Disinfection
In order to avoid damage to the product, we recommend that the product is disinfected only
when it is deemed necessary by the hospital maintenance procedures. We also recommend
that the instrument to be disinfected must first be cleaned.
Caution
To Next Page
Loading...
Need help?
General