文件编号：NR-TP-0715-008 版本：1.0
- 57 -
If the temperature value displayed by the monitor has significant difference
from the body temperature under normal condition, please check if the probe
resistance of the monitor matches the resistance set in the monitor system; if
not, please replace a probe with appropriate resistance or adjust the monitor
and select the appropriate resistance.
11.7 Setting Temperature Unit
You can define your favorite temperature unit as follows:
Select TEMP parameter area → [TEMP Setup] menu;
In the [TEMP Setup] menu, set [Unit] to [°C] or [°F].
11.8 Alarm Setup
In [TEMP Setup] menu, select [Alarm Setup >>] to enter [Alarm Setup] interface, and set
TEMP alarm switch, alarm level, upper and lower alarm limit. See 6.5 Alarm Setup for
detailed setting method.
To Next Page
Loading...