文件编号：NR-TP-0715-008 版本：1.0
- 65 -
[Strong]: Strong filter mode
Select [Draw Wave], and set the wave drawing method as below:
[Smooth]: Smooth
[Ladder]: Ladder; default.
Select [Relearn] to learn arrhythmia. In the following cases, you need to start arrhythmia
self-learning:
In ECG monitoring process, when the patient's ECG module has larger changes,
arrhythmia self-learning should be started once.
ECG module changes could cause wrong arrhythmia alarm, ST measurement lost,
and inaccurate heart rate.
12.6 Alarm Setup
Select [Alarm Setup >>] → [Alarm Setup] interface to set ECG related alarms; see 6.5 Alarm
Setup for the setting method.
To Next Page
Loading...