Northern Meditec Taurus E - Volume Control; Setting Parameter Unit

文件编号：NR-TP-0715-008 版本：1.0
- 21 -
Set the monitor time in the following steps:
 Select [Menu] Smart Hotkey→[Main Menu];

 Select [Time Setup >>] → enter [Time Setup] menu;
 Select [Date Format], and set the date format in accordance with custom
 [YYYY-MM-DD]: Year - Month - Day.
 [MM-DD-YYYY]: Month - Day - Year.
 [DD-MM-YYYY]: Day - Month - Year.
 [Date]: Set the year, month, and day.
 [Time]: Set the hour, minute and second.
4.2.4 Volume Control
1. Alarm volume
 Select Vol.Set smart hotkey → [Volume Setup] menu;
 Select [Alarm Vol]: Set [Y]. Y is X~9, X is the minimum volume, and Y value plus
/ minus 1 when turning the shuttle once.
2. Key-pressing volume
 Select Vol.Set smart hotkey → [Volume Setup] menu;
 Select [Key Volume]: [N]. N value ranges from 0 to 9, plus / minus 1 when turning
the shuttle once, select 0 to turn off the key-pressing tone, and select 9 to set to the
maximum volume.
3. QRS volume
Select Vol.Set smart hotkey → [Volume Setup] menu;
Select [QRS Volume]: [M]. M values ranges from 0 to 9, plus / minus 1 when turning
the shuttle once, select 0 to turn off the key-pressing tone, and select 9 to set to the
maximum volume.
4.2.5 Setting Parameter Unit
You can select a preferred unit through the following operations
 Select [Menu] Smart Hotkey→[Main Menu];