NorthStar EXPLORER 650 - 6-2-2 Editing a route; 6-2-4 Deleting a route; 6-2-6 Navigating a route

29Northstar Explorer 650 Installation and Operation Manual
4 To insert a waypoint in the route:
i Select where the waypoint will be:
To insert the first waypoint in a new
route, select Leg 1.
To insert a waypoint at the end of
the route, select the unused leg at
the end of the list of waypoints.
Otherwise, select the waypoint to
insert the new waypoint in front of.
ii Press
. A list of waypoints is
displayed. Select the waypoint to use.
As waypoints are inserted, the distance and
bearing of each leg is shown automatically. If
the route has more waypoints than will fit on
the display, press
or to see them.
5 To remove a waypoint from the route:
i Select the waypoint to remove.
ii Press
and select Remove.
6 Repeat this process until the route is finished.
7 Press
.
8 Display the route on the chart (see section
6-2-3) and check that the route does not cross
land or dangerous water.
6-2-2 Editing a route
Editing a route from the chart
1 In the routes display, select the route to edit.
Press
and select Edit on chart.
2 The selected route is displayed on the chart,
with a circle around the first waypoint.
3 Edit the route as described in section 6-2-1 A,
starting at step 4.
Editing a route from the routes display
1 In the routes display, press
or to
highlight the route to edit. Press and
select Edit.
2 The selected route is displayed: the route
name and a list of the waypoints.
3 Edit the route as described in section 6-2-1 B,
starting at step 3.
6-2-3 Displaying a route on the chart
To view the selected route at the centre of the
display:
1 In the routes display, press
or to
highlight the route to display. Press
and select Display.
Or, in the Chart display, press
, select
Find, then select Route. Select a route
from the list.
2 The Explorer displays the selected route on
the chart.
6-2-4 Deleting a route
1 In the routes display, press or to
highlight the route to delete. Press
and select Delete.
2 Select Yes to confirm.
6-2-5 Deleting all routes
1 In the routes display, press and select
Delete all.
2 Select Yes to confirm.
6-2-6 Navigating a route
See section 3-1-3.