55Northstar Explorer 650 Installation and Operation Manual
16 About display
To show the about display, press , select
Other, then select About. Press or to
select a display.
The about display shows:
The software version and date.
The world chart version.
Any card fitted.
The number of waypoints, routes and tracks
in the Explorer.
Wiring information for the Explorer
connectors.
In the unlikely event of having to contact a
Northstar dealer for service, quote the software
version number and date.
17 Setting up the Explorer 650
The Explorer has a number of advanced features
which are set up through the setup menu. We
recommend that you become familiar with the
operation of the unit using the default settings
before making any changes in these menus.
To go to a setup option menu, press
one
or more times to display the setup menu, then
select an option.
Note:
1 The Setup menu options are explained in the
following sections.
2 Section 2-1 describes how to set or change
data in the setup menus.
3 The setup data available will depend on the
optional sensors and instruments installed.
To Next Page
Loading...
