Notifier AFC-600 - How to Select AMG-1 Tones and Voice Messages; How to Set the AMG-1 DIP Switch (SW2)

How to Program a Releasing Zone
$
SS
HQGL[ $ 5HOHDVLQ
J
$
SS
OLFDWLRQV
AFC-600 Programming PN 51032:A 3/8/99 57
+RZ WR 3UR
J
UDP D
0DQXDO 5HOHDVH 'HOD
\
6ZLWFK
The following contains information needed to program a Manual Release Delay switch
for a monitor module
.
Description
A monitor module—connected to a UL-listed manual station
(such as the Notifier ARA-10 or NBG-12LX)—used to initiate a
manual release with 10-second delay time.
A Manual Release Delay switch overrides the programmed Delay
Timer. You can install multiple monitor modules with a
MAN REL
DELAY
Type Code that work like multiple conventional manual
release switches on a conventional zone.
How to program
1. Select a monitor module (refer to "How to Modify or Delete
a Point (2=
POINT
)" on page 21) that you want to use for the
manual release function.
2. Select the
MAN REL DELAY
Type Code.
3. Select the Releasing Zone (R0-R9) for your releasing
application.
4. Press the
ENTER
key to save, then press the
ESC
key until you
return to the Program Change screen.
Example
Figure 68
illustrates a programming example of an Monitor
Module module programmed for
MAN REL DELAY
switch for
Releasing Zone R5.
)LJXUH  0RQLWRU 0RGXOH &RQILJXUHG DV D 0DQXDO 5HOHDVH 'HOD\
6ZLWFK
For Example, program Releasing Zone R5 with a Manual
Release Delay switch for the following releasing selections:
When R5 activates, the control panel replaces the 15-second
Delay Timer with a 10-second timer.
352*50 0$1 5(/ '(/$< 02'8/( $''5 0
= =5 = = = 0
7
\S
H &RGH VHOHFWLRQ
0$1 5(/ '(/$ <
5HOHDVLQ
J
=RQH VHOHFWLRQ 5 VKRZQ
'HWHFWRU
5
FRQWURO
$5$ ZLWK 0DQXDO 5HOHDVH OHYHU
PRQLWRU
%
PRQLWRU PRGXOH ZLWK
0$1 5(/ '(/$<
7
\S
H&RGH
PRGXOH
PRGXOH
35* 5(/($6( )81&7,21 5(/($6( &21752/
'(/$<  $%257 8/, &5266 1 62.  5
Technical Manuals Online! - http://www.tech-man.com