NSK MEGATORQUE M-ESA-Y3040T25 - 5 Connector Specifications; CN1: RS-232 C Serial Communication Connector; CN1 Pin-Out; CN1 Signal List

— 5-1 —
5. Connector Specifications
5.1. CN1 : RS-232C Serial Communication Connector
l NSK’s Handy Terminal FHT11 (sold separately) can be used as an RS-232C terminal.
Table 5-1
Driver Unit connector Japan Aviation Electronics Industry, Ltd. DELC-J9SAF-13L9
Mating connector type
(user device side)
Japan Aviation Electronics Industry, Ltd.
(to be prepared by the user)*
DE-9PF-N
Mating connector shell type
(user device side)
Japan Aviation Electronics Industry, Ltd.
(to be prepared by the user)*
DE-C2-J6
* These connectors are not necessary if NSK Handy Terminal FHT11 is used.
5.1.1. CN1 Pin-Out
Figure 5-1 : CN1 Pin-out
FG
+5V
RTS
SG
DTR
DSR
RXD
CTS
TXD
5
4
3
2
1
9
8
7
6
5.1.2. CN1 Signal List
Table 5-2 : CN1 Signal List
Pin Signal Name I/O Function
1 TXD Output Transmit data
2 CTS Input Clear to send
3 RXD Input Receive data
4 DSR Input Data set ready
5 DTR Output Data terminal ready
6 SG – Digital signal ground
7 RTS Output Ready to send
8 +5V Output Never connect
9 FG – Frame ground (shield)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com