NXP Semiconductors PN544 C2 - Page 158

NXP Semiconductors
UM191812
PN544 C2 User Manual
191812 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2010. All rights reserved.
User Manual Rev. 1.2 — 2010-06-16 158 of 172
Address Name Comment Default
0x98A4
NFCT_RTOX
RTOX value to compute RWTINT (See [4])
(PN54
4 timeout will be half as specified)
0x07
0x98DE
NFCI_ATR_TO_MSB
0x00
0x98DF
NFCI_ATR_TO_LSB
Initiator Activation timeout (in 1ms step)
(Recommended Max value is 30 ms).
0x1A
0x9F2C
TGINIT_GUARD_TO_MSB
0x51
0x9F2D
TGINIT_GUARD_TO_LSB
Target Activation timeout (from 0 to 3.145s in 48µs step)
0x61
0x9F35
Card_Emulation_TO_MSB
0x04
0x9F36
Card_Emulation_TO_LSB
Time for which PN544 stays in Card Emulation mode after leaving
RF field
(from 0 to 3.145s in 48µs step)
0x11
0x9F38
To
0x9F3D
MIF_KEYSET0_KEY_A
Key A of Keyset 0 for MIFARE authenticate command
0
0x9F3E
To
0x9F43
MIF_KEYSET0_KEY_B
Key B of Keyset 0 for MIFARE authenticate command
0
0x9F44
To
0x9F49
MIF_KEYSET1_KEY_A
Key A of Keyset 1 for MIFARE authenticate command
0
0x9F4A
To
0x9F4F
MIF_KEYSET1_KEY_B
Key B of Keyset 1 for MIFARE authenticate command
0
0x9F50
To
0x9F55
MIF_KEYSET2_KEY_A
Key A of Keyset 2 for MIFARE authenticate command
0
0x9F56
To
0x9F5B
MIF_KEYSET2_KEY_B
Key B of Keyset 2 for MIFARE authenticate command
0
0x9F5C
To
0x9F61
MIF_KEYSET3_KEY_A
Key A of Keyset 3 for MIFARE authenticate command
0