OHAUS Skipper 5000 - Connections; Legal for Trade

Disc
Discount key Enter the discount in percent or absolute value
_
Minus key Access negative price entry
X
Quantity key Enter quantity
PLU
PLU key Switch between entering the price by PLU number and directly
entering the unit price
*
Pay
Star key Subtotal items or close payment
V
Vendor key Confirm item entry, call up ticket or close payment
C
Clear key Clear all entries
1.7.4 Connections
The following connections are located at the bottom side of the scale:
1 2 3 4 5 6 7
1
RS-232/COM A, for a scanner or computer
5
LAN B, to set up a network of scales
2
RS-232/COM B, for a scanner or computer
6
USB 1, to connect a USB device
3
Cash drawer connection
7
USB 2, to connect a USB device
4
LAN A, to set up a network of scales
1.8 Legal for trade
When the scale is used in trade or a legally controlled application, it must be set up, verified and
sealed in accordance with local weights and measures regulations. It is the responsibility of the
purchaser to ensure that all pertinent legal requirements are met. As verification requirements vary by
jurisdiction, the purchaser should contact their local weights and measures office if they are not
familiar with the requirements.
For products sold in Europe, the verification process has been completed at the place of manufacture.
These products have been sealed and the type plate includes supplemental metrology markings. They
may be put into service immediately. If required by local W & M authorities, additional stickers will
already be applied on the device.
For products sold in other regions, the verification process must be performed at the place of use.
To prevent access to calibration and metrological settings, the scale must be sealed using a paper
seal or wire seal.
Your new retail scale 7Skippper 5000