Oki C911dn

- 200 -
Macintosh utilities
4
5
1
3
2
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
Deleting user IDs and user
names
1
Start Print Job Accounting.
Reference
z
See “Installing” (P.198).
2
Select the user to be deleted, and click
[Delete].
Memo
z
If deleting all registered users, click [Delete All].
3
Click [Save].
4
Close the client software.
Network Card Setup Utility
The network can be set using the Network Card
Setup Utility.
TCP/IP must be enabled to use the Network Card
Setup Utility.
Note
z
Set the TCP/IP.
Setting IP addresses
1
Start the Network Card Setup Utility.
Reference
z
See “Installing utilities” (P.170).
2
Select the device.
3
Select [IP Address Setup] from the
[Setup] menu.
4
Specify the settings as necessary, and
click [Setup].
5
Enter the password, and click [OK].
– The factory-set password is the last
six alphanumeric characters of the Mac
address.
– The password is case-sensitive.
6
Click [OK] to enable the new settings.
The device network card will restart.