- 305 -
Table of setting items in the device setup screen
1
2
3
5
4
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
[Boot Menu]
Note
z
To enter this menu, press and hold the [OK] button while turning ON the power supply.
z
To enter this menu, it is necessary to enter the [Password].
z
In the default factory settings, the administrator password is [aaaaaa].
z
This menu is displayed in English only.
z
Shaded areas are factory-set values.
Item Details
Network Factory Defaults Execute Implements network menu initialization.
HDD Setup
*1
*1: Displayed
when the
HDD is
mounted.
Enable HDD No
Yes
Sets whether to start the printer viewing the HDD
is not mounted when the HDD is actually mounted.
Storage
Common
Setup
*1 *2
*1: Displayed
when the
HDD is
mounted.
*2: Displayed
when
[Enable
HDD] in
the control
panel is set
to [Yes].
Check File System Execute Implements management data (FAT information)
recovery, and resolves mismatches between the
actual (free) space in the le system and the free
space displayed.
Check All Sectors Execute Recovers defective sector information on the HDD
and le system nonconformances.
Menu Lockout
ON
OFF
Sets whether not to display menus other than the
Secure Print/Encrypted Secure Print in the control
panel.
Panel Lockout
Mode 1
Mode 2
OFF
Sets whether to disable the operations buttons on
the control panel.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
