- 301 -
Table of setting items in the device setup screen
1
2
3
5
4
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
[Adjust printer]
z
Shaded areas are factory-set values.
Item Details
Auto density compensation mode ON
OFF
Sets whether to automatically compensate density
and shade.
Auto BG compensation mode
*1
*1: Displayed if [Auto density compensation mode]
in the control panel is set to [ON].
OFF
-1
0
+1
+2
Compensates for print results variation due to
differences in the temperature and humidity
environments, print density, and print frequency.
Changes the value if there is burr in the image or
the underlay is dark.
Concentration compensation Implement Implements density compensation. Implement
when the device is in standby mode.
Color misalignment compensation Implement
Implements auto color misalignment compensation operations.
Implement when the device is in standby mode.
Fixing speed compensation OFF
-5
-4
-3
-2
-1
0
+1
+2
+3
+4
+5
Compensates the xing speed during card stock
printing.
Card stock mode
Auto
ON
OFF
Sets the card stock mode. Suppresses misalignment of
the image training edge during card stock printing.
Enabled for ultra card stock 4 and ultra card stock 5.
Density setup Cyan Density
-3
to
0
to
+3
Adjusts the cyan density.
This setting is enabled from printing after the
density compensation has been implemented.
Magenta Density
-3
to
0
to
+3
Adjusts the magenta density.
Yellow Density
-3
to
0
to
+3
Adjusts the yellow density.
Black Density
-3
to
0
to
+3
Adjusts the black density.
White Density
*2
*2: Displayed when using white
toner in C941/ES9541dn.
-3
to
0
to
+3
Adjusts the white density.
Clear Density
*3
*3: Displayed when using clear
toner in C941/ES9541dn.
-3
to
0
to
+3
Adjusts the clear density.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
