- 300 -
Table of setting items in the device setup screen
1
2
3
5
4
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
[Print total]
Note
z
To enter this menu, it is necessary to enter the [Password].
z
In the default factory settings, the password is [0000].
z
Shaded areas are factory-set values.
Item Details
Totalization function Enable
Disable
Enables/disables the totalization function.
Consumables counter
Enable
Disable
Sets whether or not to display the number of
consumables replacements.
Main counter reset
*1
*1: Displayed if [Totalization function] in the
control panel is set to [Enable].
Implement Resets the main counter aggregate value.
Consumables counter reset
*1 *2
*1: Displayed if [Totalization function] in the
control panel is set to [Enable].
*2: Displayed if [Consumables counter] in the
control panel is set to [Enable].
Implement Resets the number of consumables replacements.
New password **** Sets the new password to be entered in [Print
totalization].
Reenter password **** Sets a new password to be entered in the [Print
totalization] for which [New password] has been
set.
To Next Page
Loading...
