- 295 -
Table of setting items in the device setup screen
1
2
3
5
4
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
XPS settings
z
Shaded areas are factory-set values.
Item Details
DigitalSignature Printing illegal
signatures
also
Printing legal
signatures
only
OFF
Printing illegal signatures also:
If a document is falsied, a regular print and
falsication error report are printed.
Printing legal signatures only:
If a document is falsied, a falsication error
report only is printed.
OFF:
Signature authentication is not implemented.
DiscardControl
Auto
Individual
page
processing
OFF
Auto:
Resources are liberated as necessary.
Individual page processing:
Resources are liberated per page according to the markup.
OFF:
Discard Control function is disabled.
MC Mode
ON
OFF
Sets whether or not to use MC functions.
Unzip Mode
Auto
Speed prioritization
Print
prioritization
Auto:
Mode is switched automatically according to the
le.
Speed prioritization:
Print speed is prioritized, and partial Unzip
functions are not used.
Print prioritization:
Print processing is prioritized, and partial Unzip
functions are used.
White Page Skip
ON
OFF
Sets whether not to print blank pages.
Color settings
z
Shaded areas are factory-set values.
Item Details
Ink simulation OFF
SWOP
ISO Coated
Japan
Sets the ink simulation. This setting is enabled only
for PS language jobs.
UCR
Less
Normal
More
You can select the black plate (black) amount
during color printing.
Setting more black plate economizes on the toner
of the other three colors.
CMY 100% Density
Enable
Disable
Enables and disables 100% output over the CMY
100% shade values.
CMYK conversion
ON
OFF
If turned [OFF], this is enabled to reduce the
print time if using large amounts of CMYK data
in the PostScript print data. However, the color
coordination of the print results will change.
Further, this menu setting is disabled if using the
ink simulation function.
Spot Color
*1
*1: Displayed with C941/ES9541dn only.
White
Clear
Displays the spot color information.
The setting is enabled after the printer is restarted.