Oki C911dn

- 253 -
Setting the network from the web browser
5
1
2
4
3
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
Changing EtherTalk printer
names (Macintosh)
If using EtherTalk, you can add easily identiable
names to the device.
1
Log in as an administrator.
Reference
z
See “Logging in as an administrator” (P.223).
2
Click [Admin Setup]>[Network
Setup]>[EtherTalk] tab.
3
Enter a new name in [EtherTalk Printer
Name], and click [Submit].
Note
z
Settable printer names are 32 single-byte
alphanumeric characters max.
z
Do not use symbols (=:*@~
), etc., in the printer
name.
Changing EtherTalk zones
(Macintosh)
You can change the printer from the current zone
to another zone using EtherTalk delineated using
multiple logical zones.
Note
z
Selectable zones are within the same segments.
1
Log in as an administrator.
Reference
z
See “Logging in as an administrator” (P.223).
2
Click [Admin Setup]>[Network
Setup]>[EtherTalk] tab.
3
Enter a new name in [EtherTalk Zone
Name], and click [Submit].