- 212 -
Network setting items
5
1
2
4
3
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
Security
Item
Factory
Default
Settings
Explanation
Web Page
Conguration
Tool/ Network
Setting Plug-in
Network
Card Setup
Utility
(Mac OS X)
NetBIOS over
TCP
- - Enable
Species whether to use NetBIOS over TCP.
EtherTalk - - Disable Species whether to use EtherTalk.
Web (port No.:
80)
Device setup
(web) -
Enabled
Web setup Enable Species whether to access the device using web
pages.
Web - - 80 Species the port number to access the device
web page.
IPP (port No.:
631)
- - Disable Species whether to use IPP.
Telnet - - Disable Species whether to access the device using
Telnet.
FTP - - Disable Species whether to access the device using FTP.
SNMP - - Enable Species whether to access the device using
SNMP.
SNTP - - Disable Species whether to use SNTP.
Local Ports - - Enable Species whether to use specic protocols.
SMTP sending - - 25 Species the SMTP send port number.
Network
functions
Change
password
Change
password
Change
password
(Last 6 digits
of MAC
address)
Sets a new administrator password using 15
single-byte characters max. The password
is case-sensitive. This password is used only
when changing the setup from the utilities. The
administrator password set using the device
cannot be changed from this item.
IP ltering
Item
Factory
Default
Settings
Explanation
Web Page
Conguration
Tool/ Network
Setting Plug-in
Network
Card Setup
Utility
(Mac OS X)
IP ltering - - Disable Species whether to use IP ltering. Make
sure to make the following category settings if
enabling IP ltering. Unless these settings are
made, the device cannot be accessed via TCP/IP.
Start address
1 to 10
- - 0.0.0.0 Species the IP address authorized by access to
the device. You can specify individual addresses
or the address range.
End address
1 to 10
- - 0.0.0.0
Print 1 to 10 - - Disable Species whether to authorize print jobs from
the specied IP address.
Setup 1 to 10 - - Disable Species whether to authorize setup changes
from the specied IP address.
IP address of
the registered
administrator
- - 0.0.0.0 Automatically species the administrator IP
address. Normally only this address can access
the device.
All accesses are authorized via proxy servers if
the administrator accesses the server via a proxy
server.