Oki C911dn

- 278 -
Table of setting items in the device setup screen
1
2
3
5
4
Convenient print
functions
Appendix Index
Checking and
Changing Printer
Settings Using
the Control Panel
Network
Setup
Matching
Colors
Using Utility
Software
z
Shaded areas are factory-set values.
Item Details
Multi-purpose
tray settings
Paper weight Auto
Ultra light paper
Light paper
Plain paper
Somewhat card stock
Card stock
Greater card stock
Ultra card stock 1
Ultra card stock 2
Ultra card stock 3
Ultra card stock 4
Ultra card stock 5
Sets the paper weight for the Multi-Purpose Tray.
Using trays
As trays
Paper errors
Do not use
Sets how to use the Multi-Purpose Tray.
As tray: (Tray selection/switching)
Use as regular tray.
Paper errors:
If the output tray paper size or paper type is
different from the print data, print from the
Multi-Purpose Tray.
Do not use:
Auto tray selection and auto tray switching are
not possible.
However, if [Menu]>[Tray conguration]>[Paper
feed tray]>[Multi-Purpose Tray] is specied in
the control panel, operations will be the same
as regular trays (Uses the Multi-Purpose Tray as
the auto tray).
Tray 1 setup Paper size
Cassette size
Custom
Advanced regular
Sets the paper size for tray 1.
Paper width
*1
*1: Displayed
when
[Paper size]
is set to
[Custom]
on the
control
panel.
3.9"
to
8.3"
to
13.0"
Sets the custom paper width for tray 1.
99mm
to
210mm
to
330mm
Paper length
*1
*1: Displayed
when
[Paper size]
is set to
[Custom]
on the
control
panel.
5.8"
to
11.7"
to
18.0"
Sets the custom paper length for tray 1.
147mm
to
297mm
to
457mm