EasyManuals Logo

Oki C9850 User Manual

Oki C9850
246 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
Oki Data CONFIDENTIAL
(3) Paper Supplied from MPT
1. In the usual case, sheet receiving is depressed by the arm for rise and fall at a
home position.
2. When a regist motor rotates in the direction of (b), the arm for rise and fall
drives and sheet receiving is rotated. The paper on sheet receiving goes up
to the position where a lift rise sensor is turned on, and feeding is attained
because the arm for rise and fall goes up.
3. The hopping motor is shared with the tray and MPT feeding uses the inversion
of tray feeding.
If a hopping motor reverse-rotates, a pickup roller and a feed roller will drive and
a paper will be sent out.
4. After an entrance sensor (2) is turned on by the paper tip, a paper is sent by
specification length. A paper will stop, if the tip reaches the 2nd register strike
roller Assy.
5. A regist motor rotates in the direction of (a) simultaneously, and a paper is
conveyed with the 2nd regist roller Assy. A hopping motor is rotated until a
paper arrives at the position of the image drum cartridge (black).
6. A hopping motor is rebooted, in order to make paper feed to the following paper,
when an after the end escapes from the hopping sensor.
7. When operation of 4 to 6 is repeated and a lift rise sensor turns off, a regist
motor is rotated in the direction of (b), and the arm for rise and fall is driven,
and it goes up until a lift rise sensor turns on the paper on sheet receipt.
8. After the completion of paper sending operation, when a lift rise sensor detects
off, a regist motor is rotated in the direction of (b), and sheet receiving is
returned to a home position by dropping the arm for rise and fall.
43627911TH Rev. 3
35 /

Table of Contents

Other manuals for Oki C9850

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oki C9850 and is the answer not in the manual?

Oki C9850 Specifications

General IconGeneral
Print technologyLED
Maximum resolution1200 x 1200 DPI
Economical printingYes
Time to first page (black, normal)9 s
Time to first page (color, normal)10.5 s
Print speed (black, normal quality, A3)21 ppm
Print speed (color, normal quality, A3)19 ppm
Print speed (black, normal quality, A4/US Letter)40 ppm
Print speed (color, normal quality, A4/US Letter)36 ppm
Scan toE-mail, E-mail Server, File, FTP
Scanner typeFlatbed scanner
Grayscale levels11
Input color depth48 bit
Output color depth24 bit
Optical scanning resolution600 x 600 DPI
Copier resize25 - 400 %
Maximum number of copies999 copies
Time to first copy (black, normal)11 s
Time to first copy (color, normal)12 s
Copy speed (black, normal quality, A4)36 cpm
Copy speed (color, normal quality, A4)30 cpm
FaxingMono faxing
Modem speed33.6 Kbit/s
Fax transmission speed3 sec/page
Fax speed dialing (max numbers)500
Total input capacity2120 sheets
Total output capacity500 sheets
Total number of input trays4
Multi-Purpose tray input capacity230 sheets
Auto document feeder (ADF) input capacity100 sheets
Internal memory1024 MB
Card reader integratedNo
Internal storage capacity40 GB
Sound power level (standby)42 dB
Sound pressure level (printing)54 dB
DisplayLCD
Control typeTouch
Display diagonal8.2 \
Market positioningBusiness
Custom media width105 - 328 mm
Maximum print size297 x 420 mm
Custom media length148 - 457 mm
Duplex media weight64 - 188 g/m²
Paper tray media typesBanner, Card stock, Labels, Plain paper
Paper tray media weight64 - 216 g/m²
ISO A-series sizes (A0...A9)A3, A4, A5, A6
Maximum ISO A-series paper sizeA3
Multi-Purpose Tray media weight55 - 300 g/m²
Auto Document Feeder (ADF) media weight60 - 105 g/m²
Supported network protocols (IPv4)POP3, APOP, SMTP, TCP/IP, ARP, IP, ICMP, TCP, UDP, LPR, FTP, HTTP, IPP, BOOTP, DHCP, SNMP, DNS, ELAP, AARP, DDP, AEP, NBP, ZIP, RTMP, ATP, PAP
Direct printing-
Standard interfacesUSB 2.0
USB 2.0 ports quantity1
AC input voltage220 - 240 V
AC input frequency50 Hz
Power consumption (standby)200 W
Power consumption (PowerSave)55 W
Power consumption (average operating)750 W
Dimensions (WxDxH)672 x 889 x 1426 mm
All-in-one functionsCopy, Fax, Print, Scan
Color all-in-one functionscopy, print, scan
Storage temperature (T-T)-20 - 45 °C
Operating temperature (T-T)10 - 32 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
Maximum duty cycle150000 pages per month
Page description languagesPCL 5c, PCL XL, PDF 1.7, PostScript 3
Bundled softwareCommand WorkStation 4 Command WorkStation (Mac) EFI FreeForm EFI Mailport (Win32) EFI SendMe EMI Hot Folders Fiery Remote Scan Scansoft PaperPort SE11 Omnipage SE4 EFI Job Monitor
Mac operating systems supportedMac OS X 10.3 Panther, Mac OS X 10.4 Tiger
Server operating systems supportedWindows 2000 Advanced Server, Windows 2000 Server, Windows Server 2003, Windows Server 2003 x64
Windows operating systems supportedWindows 2000 Professional, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Ultimate, Windows XP Home, Windows XP Professional, Windows XP Professional x64

Related product manuals