Oki C9850 User Manual

Oki Data CONFIDENTIAL
2.14 Reading Version of Routine Replacement Units
This determines whether the parts are new or old according to the I/D of the consumable parts
that are routinely replaced, the fuser unit, and the state of the fuse in the belt unit (good/dead). If
the fuse is in a conductive state, then it is considered a new unit. A NEW or OLD decision takes
place when the power is turned ON and when the cover is closed. When the part is NEW, the
life counter of the unit is reset, and the NEW/OLD decision-making fuse in each unit is cut.
2.15 Life Counter of Replaceable Units
The following Table lists the life counter of the I/D, fuser unit, and belt unit that are routinely re-
placed consumable parts.
Unit State Life processing
ID Count the drum rotation in a unit of [Letter
Paper Length + Paper Interval during
continuous print].
Life :When printing a distance equivalent to
30K sheets (3P/J).
Stop Printing
However, 1500 sheets can be
printed by opening and closing the
cover.
Toner Cartridge Count the number of print dots.
Determine the usage level according to the
counter value.
(Refer to 2.16)
Stop Printing
However, 50 sheets can be printed
by re-turning the power back ON or
opening/closing the cover. (A4 5%)
Belt Unit Convert the drum rotation into [Letter Paper
Length + Distance Between Paper
Upon Continuous Printing].
One sheet of paper passing through is
counted as one on the counter.
Life:When the counter value reached 100K.
Stop Printing
However, 20 sheets can be printed
by re-turning the power back ON or
opening/ closing the cover.
Fuser Unit Disposal Toner Near-Full state.
If paper is longer than 13 inches, the number
of the paper sheets will be an integer
multiplied by 13 inches plus one.
Life: When counter value is 100K.
Stop Printing
However, power is turned off and
on again or opening/ closing the
cover, the printer will be able to
print 500 more sheets or, after
150K, 50 more sheets.
Waste Toner Box Converts the weight of discharged toner to
the number of A4 sheets and counts the
number.
Life: When the counter has reached 30K.
Stop Printing
When power is turned off and on
again or opening/closing the cover,
the printer will be able to print up to
50 counts.
2.16 Toner Usage Level Detection
The toner usage level is detected by counting the number of dots printed. The counted number
of dots is written in the IC chip in a toner cartridge.
Once toner low is detected, the toner shall be considered empty after dot counting 1,050 A4
sheets at 5%.
However, when the power is turned back ON, and the cover is opened and closed, the printer
can still print 50 more sheets.
43627911TH Rev. 3
52 /

Oki C9850 Specifications

General

Print technology	LED
Maximum resolution	1200 x 1200 DPI
Economical printing	Yes
Time to first page (black, normal)	9 s
Time to first page (color, normal)	10.5 s
Print speed (black, normal quality, A3)	21 ppm
Print speed (color, normal quality, A3)	19 ppm
Print speed (black, normal quality, A4/US Letter)	40 ppm
Print speed (color, normal quality, A4/US Letter)	36 ppm
Scan to	E-mail, E-mail Server, File, FTP
Scanner type	Flatbed scanner
Grayscale levels	11
Input color depth	48 bit
Output color depth	24 bit
Optical scanning resolution	600 x 600 DPI
Copier resize	25 - 400 %
Maximum number of copies	999 copies
Time to first copy (black, normal)	11 s
Time to first copy (color, normal)	12 s
Copy speed (black, normal quality, A4)	36 cpm
Copy speed (color, normal quality, A4)	30 cpm
Faxing	Mono faxing
Modem speed	33.6 Kbit/s
Fax transmission speed	3 sec/page
Fax speed dialing (max numbers)	500
Total input capacity	2120 sheets
Total output capacity	500 sheets
Total number of input trays	4
Multi-Purpose tray input capacity	230 sheets
Auto document feeder (ADF) input capacity	100 sheets
Internal memory	1024 MB
Card reader integrated	No
Internal storage capacity	40 GB
Sound power level (standby)	42 dB
Sound pressure level (printing)	54 dB
Display	LCD
Control type	Touch
Display diagonal	8.2 \
Market positioning	Business
Custom media width	105 - 328 mm
Maximum print size	297 x 420 mm
Custom media length	148 - 457 mm
Duplex media weight	64 - 188 g/m²
Paper tray media types	Banner, Card stock, Labels, Plain paper
Paper tray media weight	64 - 216 g/m²
ISO A-series sizes (A0...A9)	A3, A4, A5, A6
Maximum ISO A-series paper size	A3
Multi-Purpose Tray media weight	55 - 300 g/m²
Auto Document Feeder (ADF) media weight	60 - 105 g/m²
Supported network protocols (IPv4)	POP3, APOP, SMTP, TCP/IP, ARP, IP, ICMP, TCP, UDP, LPR, FTP, HTTP, IPP, BOOTP, DHCP, SNMP, DNS, ELAP, AARP, DDP, AEP, NBP, ZIP, RTMP, ATP, PAP
Direct printing	-
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Power consumption (standby)	200 W
Power consumption (PowerSave)	55 W
Power consumption (average operating)	750 W
Dimensions (WxDxH)	672 x 889 x 1426 mm
All-in-one functions	Copy, Fax, Print, Scan
Color all-in-one functions	copy, print, scan
Storage temperature (T-T)	-20 - 45 °C
Operating temperature (T-T)	10 - 32 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %
Maximum duty cycle	150000 pages per month
Page description languages	PCL 5c, PCL XL, PDF 1.7, PostScript 3
Bundled software	Command WorkStation 4 Command WorkStation (Mac) EFI FreeForm EFI Mailport (Win32) EFI SendMe EMI Hot Folders Fiery Remote Scan Scansoft PaperPort SE11 Omnipage SE4 EFI Job Monitor
Mac operating systems supported	Mac OS X 10.3 Panther, Mac OS X 10.4 Tiger
Server operating systems supported	Windows 2000 Advanced Server, Windows 2000 Server, Windows Server 2003, Windows Server 2003 x64
Windows operating systems supported	Windows 2000 Professional, Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Ultimate, Windows XP Home, Windows XP Professional, Windows XP Professional x64