- 71 -
3. Maintenance
6
Hold the handle of a new fuser unit, align the fuser unit to the grooves behind
the toner cartridges, place the fuser unit into the machine.
7
Tilt back the fuser unit lock levers (b) to lock.
8
Close the output tray (a) slowly and push the center of the tray for
confirmation.
Do not touch the LED head when closing the output tray.
9
Please recycle fuser unit.
If you must dispose of a fuser unit, put it in a plastic bag or similar container and dispose of it in accordance with
your municipality's ordinances or guidelines.
To Next Page
Loading...
