Oki MC873dn User Manual

45850101TH Rev.1
3-39
Oki Data CONFIDENTIAL
3. MAINTENANCE MENUS
Ten characters to enter
(AE01234567)
Re
vision number
• To assign a PU serial number to the printer, in the PU serial number setting
window, enter ten characters. As shown in the following serial number
label example, the ten characters are the printer’s the SAP serial number
excluding the revision number.
Serial number label example
• The PU serial number is shown at Printer Serial Number in the header of
the printer’s configuration report (a Menu Map) output from the printer. After
the PU serial number is changed, it can be checked by printing the report
from the printer.
(2) Switching to Shipping mode
When the CU/PU control board is replaced with a new one, the printer is
placed in the Factory mode. Switch the printer to the Shipping mode.
• To switch, use the Factory/Shipping mode setting window described in the
Maintenance Utility operation manual.
Note! Replacing the EEPROM (the PU control board) with a new one clears life
information about consumables, including the belt, and toner. Note that, until
the consumables are replaced, this makes differences between their displayed
consumed and consumed lives. Such life information cleared is as shown
below. Upon replacement of the consumables, the information (counts) except
the total number of printed sheets are cleared, and differences between the
counts and consumed lives of the consumables are cleared.
Option Description Count description
FUSER UNIT A fuser life count. The number of prints
made from the first-time
installation of a fuser unit until
present *1
Belt Unit A belt unit life count The number of prints
made to date from the first-
time installation of a belt unit
until present *2
Total number of
printed sheets
A printer life count. The total number of printed
sheets from the beginning of
use of the printer*3
Prints Black
Prints Yellow
Prints Magenta
Prints Cyan
The total number of
printed sheets in each
color
The total number of printed
sheets in each color from the
beginning of use of the printer
*3
*1 Based on the paper length of Legal 13, if the sheet is the legal 13 length or less, it
is regarded as one count, and if the sheet length exceeds the Legal 13 length, the
number of counts is determined by how many times as large is the Legal 13 length
as that of the sheet. (The decimal is rounded out.)
*2 One third of the number of belt turns in A4 (A4 portrait) three-pages-per-job printing
is regarded as one count.
*3 Tow counts apply to duplex print.

Oki MC873dn Specifications

General

Duplex printing	Yes
Print technology	LED
Maximum resolution	1200 x 600 DPI
Time to first page (black, normal)	9.5 s
Print speed (black, normal quality, A3)	20 ppm
Print speed (black, normal quality, A4/US Letter)	35 ppm
Copier resize	25 - 400 %
Maximum copy resolution	600 x 1200 DPI
Maximum number of copies	999 copies
Time to first copy (black, normal)	10 s
Copy speed (black, normal quality, A4)	35 cpm
Scan to	CIFS, E-mail, FTP, HTTP, Image, USB
Scan drivers	TWAIN
Scanner type	ADF scanner
Output color depth	24 bit
Scan speed (color)	50 ppm
Image formats supported	JPG, TIF
Document formats supported	PDF, XPS
Optical scanning resolution	600 x 600 DPI
Faxing	Color faxing
Fax memory	8 MB
Modem speed	33.6 Kbit/s
Fax speed dialing (max numbers)	1000
Digital sender	-
Printing colors	Black, Cyan, Magenta, Yellow
Maximum duty cycle	75000 pages per month
Page description languages	Epson FX, IBM ProPrinter, PCL 5c, PCL 6, PDF 1.7, PostScript 3
Wi-Fi	No
Cabling technology	10/100/1000Base-T(X)
Security algorithms	802.1x RADIUS, EAP, SSL/TLS, WPA2
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Supported network protocols (IPv4)	TCP, DHCP, DHCPv6, BOOTP, HTTP, HTTPS, DNS, DDNS, WINS, , UPNP, Bonjour, SNMPv1&v3, SNTP, IPP, IPPS, WSD Print, WSD Scan, LLTD, IEEE802.1X, LPR, Port9100, Telnet, FTP, IPSEC, SecureProtocolServer, LDAP, LDAPS, CIFS, FTP, FTPS, SMTP, SMTPS, POP3
Internal memory	1260 MB
Internal storage capacity	250 GB
Sound power level (standby)	37 dB
Sound pressure level (printing)	54 dB
Paper input type	Paper tray
Total input capacity	300 sheets
Maximum input capacity	400 sheets
Total number of input trays	1
Auto document feeder (ADF) input capacity	100 sheets
Envelopes sizes	10, C4, C5, DL, Monarch
Custom media width	148.5 - 297 mm
Custom media length	210 - 431.8 mm
Paper tray media types	Banner, Envelopes, Plain paper
Paper tray media weight	64 - 220 g/m²
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), Legal (media size), Letter (media size), Statement (140 x 216mm)
ISO A-series sizes (A0...A9)	A3, A4, A5, A6
ISO B-series sizes (B0...B9)	B4, B5
Maximum ISO A-series paper size	A3
Multi-Purpose Tray media weight	64 - 256 g/m²
Auto Document Feeder (ADF) media weight	60 - 120 g/m²
Display	LCD
Control type	Touch
Product color	Black, White
Display diagonal	7 \
Market positioning	Business
Standard interfaces	Ethernet, RJ-11, USB 2.0
Optional connectivity	Wireless LAN
USB 2.0 ports quantity	2
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	1400 W
Power consumption (off)	0.1 W
Power consumption (sleep)	3 W
Power consumption (PowerSave)	30 W
Power consumption (average operating)	850 W
Sustainability certificates	ENERGY STAR
Storage temperature (T-T)	0 - 43 °C
Operating temperature (T-T)	10 - 32 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	600 mm
Width	563 mm
Height	700 mm