Oki MC873dn User Manual

45850101TH Rev.1
3-33
Oki Data CONFIDENTIAL
3. MAINTENANCE MENUS
3.4.8 Consumable counter display
The consumable counter display is used for viewing the usage of consumables.
1. Enter the self-diagnostic mode and, until CONSUMABLE STATUS appears,
press the [2] or [8] button (the [2] button displays the next test option and the [8]
button displays the preceding test option). Then press the [6] button.
2. Pressing the [2] or [8] button displays the usage of each consumable (pressing
the [*] or [#] button is disabled).
3. Press the [4] button to end the option (the state in step 1 is restored).
Upper Display Lower Display Format Unit Detail
K-ID UNIT ******** IMAGES DEC Images Each displays the number of
turns performed by each image
drum unit from the first-time
installation of it until present,
*1
Y-ID UNIT ******** IMAGES DEC Images
M-ID UNIT ******** IMAGES DEC Images
C-ID UNIT ******** IMAGES DEC Images
K-ID USED ******** % DEC % Displays the usage of ID of each
color.
Y-ID USED ******** % DEC %
M-ID USED ******** % DEC %
C-ID USED ******** % DEC %
FUSER UNIT ******** PRINTS DEC Prints Displays the number of prints
made from the first-time
installation of a fuser unit until
present *2
TR BELT UNIT ******** IMAGES DEC Images Displays the number of prints
made to date from the first-time
installation of a belt unit until
present *3
Upper Display Lower Display Format Unit Detail
K-TONER
(FULL)
******** % DEC % Each displays the usage of toner
of a color.
Y-TONER
(FULL)
******** % DEC %
M-TONER
(FULL)
******** % DEC %
C-TONER
(FULL)
******** % DEC %
M-WASTE
TNR CNT
******** TIMES DEC Times Each displays the amount of
waste toner. Counts by the
number of TC replacements of
colors on the near side
C-WASTE
TNR CNT
******** TIMES DEC Times
K OVER RIDE
CNT
******** TIMES DEC Times Each displays the extension
life counter value of a toner
cartridge.
Y OVER RIDE
CNT
******** TIMES DEC Times
M OVER RIDE
CNT
******** TIMES DEC Times
C OVER RIDE
CNT
******** TIMES DEC Times
*1 One third of the number of drum turns inA4 (A4 portrait) three-pages-per-job printing is
regarded as one count.
*2 Based on the paper length of Legal 13, if the sheet is the legal 13 length or less, it is regarded
as one count, and if the sheet length exceeds the Legal 13 length, the number of counts
is determined by how many times as large is the Legal 13 length as that of the sheet. (the
decimal is rounded out.)
*3 One third of the number of belt turns in A4 (A4 portrait) three-pages-per-job printing is
regarded as one count.

Oki MC873dn Specifications

General

Duplex printing	Yes
Print technology	LED
Maximum resolution	1200 x 600 DPI
Time to first page (black, normal)	9.5 s
Print speed (black, normal quality, A3)	20 ppm
Print speed (black, normal quality, A4/US Letter)	35 ppm
Copier resize	25 - 400 %
Maximum copy resolution	600 x 1200 DPI
Maximum number of copies	999 copies
Time to first copy (black, normal)	10 s
Copy speed (black, normal quality, A4)	35 cpm
Scan to	CIFS, E-mail, FTP, HTTP, Image, USB
Scan drivers	TWAIN
Scanner type	ADF scanner
Output color depth	24 bit
Scan speed (color)	50 ppm
Image formats supported	JPG, TIF
Document formats supported	PDF, XPS
Optical scanning resolution	600 x 600 DPI
Faxing	Color faxing
Fax memory	8 MB
Modem speed	33.6 Kbit/s
Fax speed dialing (max numbers)	1000
Digital sender	-
Printing colors	Black, Cyan, Magenta, Yellow
Maximum duty cycle	75000 pages per month
Page description languages	Epson FX, IBM ProPrinter, PCL 5c, PCL 6, PDF 1.7, PostScript 3
Wi-Fi	No
Cabling technology	10/100/1000Base-T(X)
Security algorithms	802.1x RADIUS, EAP, SSL/TLS, WPA2
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Supported network protocols (IPv4)	TCP, DHCP, DHCPv6, BOOTP, HTTP, HTTPS, DNS, DDNS, WINS, , UPNP, Bonjour, SNMPv1&v3, SNTP, IPP, IPPS, WSD Print, WSD Scan, LLTD, IEEE802.1X, LPR, Port9100, Telnet, FTP, IPSEC, SecureProtocolServer, LDAP, LDAPS, CIFS, FTP, FTPS, SMTP, SMTPS, POP3
Internal memory	1260 MB
Internal storage capacity	250 GB
Sound power level (standby)	37 dB
Sound pressure level (printing)	54 dB
Paper input type	Paper tray
Total input capacity	300 sheets
Maximum input capacity	400 sheets
Total number of input trays	1
Auto document feeder (ADF) input capacity	100 sheets
Envelopes sizes	10, C4, C5, DL, Monarch
Custom media width	148.5 - 297 mm
Custom media length	210 - 431.8 mm
Paper tray media types	Banner, Envelopes, Plain paper
Paper tray media weight	64 - 220 g/m²
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), Legal (media size), Letter (media size), Statement (140 x 216mm)
ISO A-series sizes (A0...A9)	A3, A4, A5, A6
ISO B-series sizes (B0...B9)	B4, B5
Maximum ISO A-series paper size	A3
Multi-Purpose Tray media weight	64 - 256 g/m²
Auto Document Feeder (ADF) media weight	60 - 120 g/m²
Display	LCD
Control type	Touch
Product color	Black, White
Display diagonal	7 \
Market positioning	Business
Standard interfaces	Ethernet, RJ-11, USB 2.0
Optional connectivity	Wireless LAN
USB 2.0 ports quantity	2
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	1400 W
Power consumption (off)	0.1 W
Power consumption (sleep)	3 W
Power consumption (PowerSave)	30 W
Power consumption (average operating)	850 W
Sustainability certificates	ENERGY STAR
Storage temperature (T-T)	0 - 43 °C
Operating temperature (T-T)	10 - 32 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	600 mm
Width	563 mm
Height	700 mm