Oki MC873dn - Displayed 「ADF Document Jam; Jam Occurs at ADF Unit

Oki Data CONFIDENTIAL
45850101TH Rev.1
2-62
2. TROUBLESHOOTING PROCEDURES
2.5.5. (3-5) Displayed
「
ADF Document Jam
」
(3-5-1) Jam occurs at ADF unit.
Check item Check work
Actions to be taken
at NG
(3-5-1-1) Check condition of the paper running path
Paper running path
of the ADF Unit
Check if paper is jammed or not in the paper
running path.
Remove the
jammed paper.
(Refer to
the following
process)
(3-5-1-2) Check condition of the mechanical parts
Check the error code 0001:Check the Hopping sensor, Regist sensor,
Scan sensor, Reverse sensor
0002:Check the Document set sensor
Replace the
sensor with the
good sensor
lever.
How to remove the paper (Displayed
「
ADF Document Jam
」
)
When you can see the document In the Duplex Paper Path
(1) Open the ADF cover, and pull out the document upward.
When you can see the document Inside the ADF
(1) Remove any documents from the document tray if any.
(2) Open the ADF cover.