45850101TH Rev.1
4-15
ver-assy-top-ADF
Shaft port
Portion A
Board
(3) And push the claw of cover-ADF-R
①
.
4.2.10.1 Tray-Assy-Document/Cover-ADF-R
(1) Open the ADF-Unit.
(2) Unlatch the four claws of cover-ADF-R
①
.
(4) Remove the cover-ADF-R
①
in the direction of the arrow.
(5) Open the Cover-assy-top-ADF, and release the post of the portion A.
And, disconnect the cables of the Tray-Assy-Document
②
from the Board.
Next, release the post of the opposite side of the portion A at the Tray-Assy-
Document
②
, and detach the Tray-Assy-Document
②
with passing the cables
through the shaft port.
Claw
①
Cla
②
To Next Page
Loading...
