Oki MC873dn - Page 236

45850101TH Rev.1
4-86
Oki Data CONFIDENTIAL
4. REPLACEMENT OF PARTS
2) Plate-Front(Caulking)
Gear-Regist
HARVES MDF-1207 All around of shaft
Apply HARVES MDF-1207 to
45831901 Plate-Front(Caulking)
Especially, to the shaft.
Apply MOLYKOTE (EM-30LP) Class C
to the gear tooth of Gear-Regist.
Leave it for about 3minutes (drying time) after painting HARVES MDF-1207,
and then assemble.
3) Plate-Drive(Caulking)
HARVES MDF-1207 All around of shaft
Apply HARVES MDF-1207 to
45831901 Plate-Front(Caulking
)
Especially, to the shaft(4 portions).
Leave it for about 3minutes (drying time) after painting HARVES MDF-1207,
and then assemble gears.