Oki MC873dn User Manual

Oki Data CONFIDENTIAL
45850101TH Rev.1
2-4
2. TROUBLESHOOTING PROCEDURES
No. Category PJL Status
Code
Panel messages Description
6 Initializing - Inspection is
required.
PU Flash Error
It is shown that PU firmware has booted in Loader
mode.
If initialization is completed, it will change to the
status of no.7.
This status may occur also in a user environment.
When it occurs, the maintenance by a
maintenance member is required (equivalent to
S/C).
Communication error occurred between CU and
PU. PU firmware may not be downloaded.
7 Initializing - Inspection is
required.
PU Communication
Error
Displays that communication to PU firmware
failed.
This status may occur also in a user environment.
When it occurs, the maintenance by a
maintenance member is required (equivalent to
S/C).
If this status occurred during the unit initialinzing
the message is displayed by English.
8 Initializing - Status Mode Displays that normal Online mode starts.
Data (Job) from an external portion is processed
even though an error takes place after Online
(ready) state once this mode starts.
Displays Error or Warning on a panel.
This function is secret to users. Therefore, this
status does not occur in a user environment.
9 Initializing - Indicates that it is initializing of scanner.
This message isdisplayed that mirror position
initialization at the time of power-on scanner is
starting.
No. Category PJL Status
Code
Panel messages Description
10 Initializing - %STORAGE%
Error:
%ERRCODE%
To %STORAGE%
format, select
[Format]
To shut down,
select [Cancel]
%ERRCODE%: 0
Indicates that the unformated Storage is detected
during the initializing.
%ERRCODE%: 250
Indicates that machine detected broken file about
secure print.
Needs to format once again.
[Format] pressed, Storage format is started and
the unit is rebooted automalically.
[Cancel] pressed, the unit is shut down.
---------------------------------
The following is changed by a status parameter.
%STORAGE%：
HDD
%ERRCODE%：
Error Code
11 Information - %TRADEMARK% Indicates that the new consumable (toner).
This status should be appeared at detecting the
new consumable (toner), and be disappeared
automatically after 3 seconds.
%TRADEMARK% is contained in the consumable
tag.
12 Information - Indicating that printer/MFP received the
command for identifying printer from AirPrint
device such as iPhone,
This status is removed automatically in 10
seconds.
13 Information - Document glass
cover is open.
Please Close it.
Document glass cover is open.
if document glass cover is open, scanning cannot
be started.
14 Information - Finished changing
language.
-
15 Initializing - Detected a
abnormality of
inside database.
The data must be
deleted.
After press Close,
the data will be
deleted, and then
reboot.
Indicating that it is in the state which the database
cannot recover.
[OK] pressed, the error database is to be deleted
and the unit is rebooted automalically.
[Cancel] pressed, the unit is shut down.
16 Information - #N/A! Indicating that the IC card reader supported with
a this machine is connected.

Oki MC873dn Specifications

General

Duplex printing	Yes
Print technology	LED
Maximum resolution	1200 x 600 DPI
Time to first page (black, normal)	9.5 s
Print speed (black, normal quality, A3)	20 ppm
Print speed (black, normal quality, A4/US Letter)	35 ppm
Copier resize	25 - 400 %
Maximum copy resolution	600 x 1200 DPI
Maximum number of copies	999 copies
Time to first copy (black, normal)	10 s
Copy speed (black, normal quality, A4)	35 cpm
Scan to	CIFS, E-mail, FTP, HTTP, Image, USB
Scan drivers	TWAIN
Scanner type	ADF scanner
Output color depth	24 bit
Scan speed (color)	50 ppm
Image formats supported	JPG, TIF
Document formats supported	PDF, XPS
Optical scanning resolution	600 x 600 DPI
Faxing	Color faxing
Fax memory	8 MB
Modem speed	33.6 Kbit/s
Fax speed dialing (max numbers)	1000
Digital sender	-
Printing colors	Black, Cyan, Magenta, Yellow
Maximum duty cycle	75000 pages per month
Page description languages	Epson FX, IBM ProPrinter, PCL 5c, PCL 6, PDF 1.7, PostScript 3
Wi-Fi	No
Cabling technology	10/100/1000Base-T(X)
Security algorithms	802.1x RADIUS, EAP, SSL/TLS, WPA2
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Supported network protocols (IPv4)	TCP, DHCP, DHCPv6, BOOTP, HTTP, HTTPS, DNS, DDNS, WINS, , UPNP, Bonjour, SNMPv1&v3, SNTP, IPP, IPPS, WSD Print, WSD Scan, LLTD, IEEE802.1X, LPR, Port9100, Telnet, FTP, IPSEC, SecureProtocolServer, LDAP, LDAPS, CIFS, FTP, FTPS, SMTP, SMTPS, POP3
Internal memory	1260 MB
Internal storage capacity	250 GB
Sound power level (standby)	37 dB
Sound pressure level (printing)	54 dB
Paper input type	Paper tray
Total input capacity	300 sheets
Maximum input capacity	400 sheets
Total number of input trays	1
Auto document feeder (ADF) input capacity	100 sheets
Envelopes sizes	10, C4, C5, DL, Monarch
Custom media width	148.5 - 297 mm
Custom media length	210 - 431.8 mm
Paper tray media types	Banner, Envelopes, Plain paper
Paper tray media weight	64 - 220 g/m²
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), Legal (media size), Letter (media size), Statement (140 x 216mm)
ISO A-series sizes (A0...A9)	A3, A4, A5, A6
ISO B-series sizes (B0...B9)	B4, B5
Maximum ISO A-series paper size	A3
Multi-Purpose Tray media weight	64 - 256 g/m²
Auto Document Feeder (ADF) media weight	60 - 120 g/m²
Display	LCD
Control type	Touch
Product color	Black, White
Display diagonal	7 \
Market positioning	Business
Standard interfaces	Ethernet, RJ-11, USB 2.0
Optional connectivity	Wireless LAN
USB 2.0 ports quantity	2
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	1400 W
Power consumption (off)	0.1 W
Power consumption (sleep)	3 W
Power consumption (PowerSave)	30 W
Power consumption (average operating)	850 W
Sustainability certificates	ENERGY STAR
Storage temperature (T-T)	0 - 43 °C
Operating temperature (T-T)	10 - 32 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	600 mm
Width	563 mm
Height	700 mm