Oki MC873dn User Manual

Oki Data CONFIDENTIAL
45850101TH Rev.1
2-28
2. TROUBLESHOOTING PROCEDURES
No. Category PJL Status
Code
Panel messages Description
133 Error
684
685
686
687
40502(Y)
40503(M)
40504(C)
40501(K)
Incompatible
%COLOR% Image
Drum.
Press the [Details]
button for help.
The signature ID of image drum can not be
recognized (Unauthorized third party).
As probable missing to measure the amount of
drum, the printer notifies error status and stop
printing.
Error 684 : Y
Error 685 : M
Error 686 : C
Error 687 : K
Four following behavior is carried out by mode of
operation.
1.Only warning display .(This error is not
displayed).
2.Warning status takes effect at Cover Open/
Close.
3.With no automatic concentration compensation .
4.This error is displayed and it stops.
When this error occurs in more than one color
drums, the all drums that have this error status
and a high most priolity error code are displayed.
(Example)
When this error occurs in all drums: YMCK Drum
Regional Mismatch: 684
When this error occurs in MC drums: MC Drum
Regional Mismatch: 685
No. Category PJL Status
Code
Panel messages Description
134 Error
694
695
696
697
40506(Y)
40507(M)
40508(C)
40505(K)
%COLOR% Image
Drum Not Installed.
Press the [Details]
button for help.
The image drum is not installed.
Error 694 : Y
Error 695 : M
Error 696 : C
Error 697 : K
Four following behavior is carried out by mode of
operation.
1.Only warning display .(This error is not
displayed).
2.Warning status takes effect at Cover Open/
Close.
3.With no automatic concentration compensation .
4.This error is displayed and it stops.
135 Error
480
(FaceDown)
485 (2ndBIN)
40422(2nd
Bin)
40075(1st
Bin)
Output Tray (or
Upper Output Tray)
Full.
1st Bin or 2nd Bin is stacked full. Remove the
paper.
136 Error - Changing
Language.
Please wait.
It is during a language change. Wait for a while.
During this message indication, the operation
except the shut down button becomes invalid
137 Error - Language Change
Failed .Error num：
%CODE%
Language change failed. It is necessary to Pow-
Off and Pow-On.
138 Error Cannot print
because your
account balance is
0.
User name:
%USERNAME%
PC Print job:
%DOCUMENTNAME%
To continue the
print job, add the
balance and select
[Restart Print].
For canceling the
print job, select
[Cancel Print].
Indicating that the job can't be printed because
there are no balances of the account the job is
using.
139 Error #N/A! Indicating that when reading by ADF, the ADF
unit was opened.

Oki MC873dn Specifications

General

Duplex printing	Yes
Print technology	LED
Maximum resolution	1200 x 600 DPI
Time to first page (black, normal)	9.5 s
Print speed (black, normal quality, A3)	20 ppm
Print speed (black, normal quality, A4/US Letter)	35 ppm
Copier resize	25 - 400 %
Maximum copy resolution	600 x 1200 DPI
Maximum number of copies	999 copies
Time to first copy (black, normal)	10 s
Copy speed (black, normal quality, A4)	35 cpm
Scan to	CIFS, E-mail, FTP, HTTP, Image, USB
Scan drivers	TWAIN
Scanner type	ADF scanner
Output color depth	24 bit
Scan speed (color)	50 ppm
Image formats supported	JPG, TIF
Document formats supported	PDF, XPS
Optical scanning resolution	600 x 600 DPI
Faxing	Color faxing
Fax memory	8 MB
Modem speed	33.6 Kbit/s
Fax speed dialing (max numbers)	1000
Digital sender	-
Printing colors	Black, Cyan, Magenta, Yellow
Maximum duty cycle	75000 pages per month
Page description languages	Epson FX, IBM ProPrinter, PCL 5c, PCL 6, PDF 1.7, PostScript 3
Wi-Fi	No
Cabling technology	10/100/1000Base-T(X)
Security algorithms	802.1x RADIUS, EAP, SSL/TLS, WPA2
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Supported network protocols (IPv4)	TCP, DHCP, DHCPv6, BOOTP, HTTP, HTTPS, DNS, DDNS, WINS, , UPNP, Bonjour, SNMPv1&v3, SNTP, IPP, IPPS, WSD Print, WSD Scan, LLTD, IEEE802.1X, LPR, Port9100, Telnet, FTP, IPSEC, SecureProtocolServer, LDAP, LDAPS, CIFS, FTP, FTPS, SMTP, SMTPS, POP3
Internal memory	1260 MB
Internal storage capacity	250 GB
Sound power level (standby)	37 dB
Sound pressure level (printing)	54 dB
Paper input type	Paper tray
Total input capacity	300 sheets
Maximum input capacity	400 sheets
Total number of input trays	1
Auto document feeder (ADF) input capacity	100 sheets
Envelopes sizes	10, C4, C5, DL, Monarch
Custom media width	148.5 - 297 mm
Custom media length	210 - 431.8 mm
Paper tray media types	Banner, Envelopes, Plain paper
Paper tray media weight	64 - 220 g/m²
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), Legal (media size), Letter (media size), Statement (140 x 216mm)
ISO A-series sizes (A0...A9)	A3, A4, A5, A6
ISO B-series sizes (B0...B9)	B4, B5
Maximum ISO A-series paper size	A3
Multi-Purpose Tray media weight	64 - 256 g/m²
Auto Document Feeder (ADF) media weight	60 - 120 g/m²
Display	LCD
Control type	Touch
Product color	Black, White
Display diagonal	7 \
Market positioning	Business
Standard interfaces	Ethernet, RJ-11, USB 2.0
Optional connectivity	Wireless LAN
USB 2.0 ports quantity	2
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	1400 W
Power consumption (off)	0.1 W
Power consumption (sleep)	3 W
Power consumption (PowerSave)	30 W
Power consumption (average operating)	850 W
Sustainability certificates	ENERGY STAR
Storage temperature (T-T)	0 - 43 °C
Operating temperature (T-T)	10 - 32 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	600 mm
Width	563 mm
Height	700 mm