10-003591-01EN [Q7780031], Rev. 4, January 2020
Important Information — Please Read Before Use6
Some of the details of components and/or software images in this manual may differ
from your instrument’s components or software display. However, the principles
remain the same.
Instrument Compatibility
The FlexoFORM scanner is compatible with the ancillary equipment listed in Table 2
on page 6. Also see “Spare Parts and Accessories” on page 65 for a list of compatible
accessories.
Always use equipment and accessories that meet Olympus specifications. Using
incompatible equipment could cause equipment malfunction and/or damage or
human injury.
Repair and Modification
The FlexoFORM scanner contains user-serviceable parts. See “Maintenance and
Troubleshooting” on page 45 for information about authorized repairs and
maintenance.
Table 2 Ancillary equipment
Part number Description
Several available models
(contact Olympus for details)
OmniScan series flaw detectors
CFU03 [U8780008] Electric water pump and tubing, 120 V and 220 V
WTR-SPRAYER-8L [U8775001] Eight liter manual water pump
OMNI-A-ADP27 [U8780329] LEMO female to DE15 male adaptor for encoder
connector on OmniScan MX flaw detector
To Next Page
Loading...