10-003591-01EN [Q7780031], Rev. 4, January 2020
Specifications 57
6. Specifications
6.1 General Specifications
The general specifications for the FlexoFORM scanner are listed in Table 6 on page 57.
Table 6 General specifications
Parameter Value
General
Dimensions (L × W × H) 26 cm × 10 cm × 10 cm
Weight 1.53 kg
Inspection surface
curvature
From 114 mm (4.5 in.) minimum diameter up to a flat surface
Probe Type: FA1
64 elements, flexible
Cable length: 5 m
Center frequency: 7.5 MHz
Part number: Q3301201
Wedges Type: SFA1-Flexo — multiple models for a range of inspection
surface radii (see Table 7 on page 59 and Table 12 on page 71).
Alternative wedges for inspections without a FlexoFORM scanner
are described in “Alternative Components” on page 21, and listed
in Table 13 on page 72 and Table 14 on page 73.
Minimum clearance Required free access distance over inspection surface:
• 85 mm for 114 mm (4.5 in.) pipe
• 91 mm for 203 mm (8 in.) pipe
• 98 mm for 1219 mm (48 in.) pipe
To Next Page
Loading...
