Olympus FlexoFORM - Table 11 Flexoform Scanner and Probe Kits

10-003591-01EN [Q7780031], Rev. 4, January 2020
Chapter 770
Q7201704 Kit of ten (10) foams for SFA1-
SMALL-OD2.375 water wedge
SFA1-SMALL-SP-Foam-
OD2.375
Q7201705 Kit of ten (10) foams for SFA1-
SMALL-OD2.875 water wedge
SFA1-SMALL-SP-Foam-
OD2.875
Q7201706 Kit of ten (10) foams for SFA1-
SMALL-OD3.5 water wedge
SFA1-SMALL-SP-Foam-
OD3.5
Q7201707 Kit of ten (10) foams for SFA1-
SMALL-OD4 water wedge
SFA1-SMALL-SP-Foam-
OD4
Q7201708 Kit of ten (10) foams for SFA1-
SMALL-OD4.5 water wedge
SFA1-SMALL-SP-Foam-
OD4.5
Table 11 FlexoFORM scanner and probe kits
Part order
number
Description
Marketing
number
Q7500061 FlexoFORM scanner kit (without probe and wedges) for
corrosion inspection of pipe elbows.
Package includes: encoder cable with LEMO connector
compatible with current generation of OmniScan and FOCUS PX
instruments, irrigation tube, basic spare parts, and accessories
packaged in a carrying case. Cable and tube are 5 m long.
Requires FA1 probe and SFA1 water wedges, which are ordered
separately.
FlexoFORM-
K-SCN
Q7500062 FlexoFORM scanner kit for corrosion inspection of pipe elbows.
Package includes: Flexible 7.5 MHz, 64 element FA1 phased
array probe, one (1) SFA1 water wedge for 219 mm (8.625 in.)
outside diameter, encoder cable with LEMO connector
compatible with current generation of OmniScan and FOCUS PX
instruments, irrigation tube, basic spare parts, and accessories
packaged in a carrying case. All cables and tube are 5 m long.
Requires SFA1 water wedges, which are ordered separately.
FlexoFORM
Table 10 SFA1 wedge spare part list (continued)
Item
Part order
number
Description Marketing number