10-003591-01EN [Q7780031], Rev. 4, January 2020
Spare Parts and Accessories 67
26 Q7500065 N/A Kit of 12 foam gaskets for water wedge used on
small pipe diameters, 114 mm (4.5 in.) to 203 mm
(8.0 in) OD
FlexoFORM-
SP-SFoam
Q7500066 N/A Kit of 12 foam gaskets for water wedge used on pipe
diameters over 203 mm (8.0 in) OD
FlexoFORM-
SP-LFoam
27 Q8301421 1 Water connector N/A
28
N/A
a
1 Fitting, barbed brass, 1/8 NPT × 10-32 N/A
29 Q8301438 1 Tube, water, 6.0 mm × 200 mm N/A
30 Q8301439 1 Union, straight, QS-6 N/A
31 Q8301443 2 Wheel set (2) N/A
32 Q8301420 4 Wheel shaft N/A
33 Q8301462 8 Bearing, 6.0 × 5.0 N/A
34 Q8301463 4 Flanged bushing, ID 6.0 × 8.0 × 4.0 mm N/A
35 Q8301427 4 Flat washer #4, M3 N/A
36 Q8301428 4 Socket button head cap screw (SBHCS),
M3.0 × 0.5 × 6.0
N/A
N/A Q7500060 N/A FlexoFORM scanner (without probe, wedges,
carrying case, spare part and accessories) for
corrosion inspection of pipe elbows.
Package includes: irrigation tubes as well as encoder
cable with LEMO connector compatible with current
generation of OmniScan and FOCUS PX
instruments. Cable and tube are 5 m long. Requires
FA1 probe and SFA1 water wedges, which are
ordered separately.
FlexoFORM-
SCN
N/A Q8000207 N/A FlexoFORM encoder cable, 5 m long with LEMO
connector compatible with current generation of
OmniScan and FOCUS PX instruments
FlexoFORM-
SP-Cable
N/A Q7500064 N/A Basic spare part kit for FlexoFORM scanner —
includes o-rings, screws and basic hardware (see
Figure 7-2 on page 68).
FlexoFORM-
SP-Basic
N/A Q8301464 N/A Line marking template tool N/A
N/A Q8301440 N/A Flexible magnetic straightedge, 1.6 mm × 12.7 mm ×
3.05 m (1/16 in. × 1/2 in. × 10 ft)
N/A
N/A Q8301465 N/A Allen key, 2.5 mm N/A
Table 9 Spare parts (continued)
Item
Part order
number
Qty Description
Marketing
number
To Next Page
Loading...
