126
Tip
To save two or more converted files in a specific folder in a single operation, follow the procedure below.
1. Click the [Folder] tab.
2. Set the following items.
File Name
Selects from [Original Name] or [Base Name]. Select [Original Name] to save the file with an original name;
select [Base Name] when you want to start all of the new names with the same stem. If a file does not have a
shooting date, the date of the last update is used instead.
Prefix
If you select [Base Name] as the file name, enter the stem to prefix to all of the new names.
Sequential Number
If you select [Base Name], enter the number to start with and the digits (including leading zeros).
Register in OLYMPUS Master
Check this checkbox to save converted files in a specific folder and register them in OLYMPUS Master at the
same time. The files will be registered in OLYMPUS Master with the shooting date (or the created date if the
shooting date is not available).
Location
Clicking the [Browse] button displays the [Select Folder] dialog box. In the [Select Folder] dialog box, select
the location to save the files, then click the [OK] button.
To Next Page
Loading...