“iQFreeze” (except for Omnicomm Smart) – use for connection of the refrigerator
control device
“ALM Weight Indicator” – use for connection to the axle load monitoring device
“Modbus (Struna +, PMP-201)” – use for connection to the level gauge PMP-201 or
the Struna + system
“TPMS Pressure Pro” (ony for RS-232 interface) – use for connection of the tire
pressure sensors though TPMS Pressure Pro protocol
“Truck-TPMS” (ony for RS-232 interface) – use for connection of the tire pressure
sensors though Truck-TPMS protocol
“TPMS 6-13” (ony for RS-232 interface) – use for connection of the tire pressure
sensors though TPMS 6-13 protocol. The terminal transmits temperature data with
an interval of 20 degrees: -40,-20, 0, +20,…, +100. The frequency and transmission
depend on the energy-saving settings of the wireless pressure sensors configured
in accordance with the TPMS user manual.
To Next Page
Loading...
