Omnicomm Profi - Geofences Setting

*SETDOUT param#
Param=0
Param=1
Param=0,1
SETDOUT
Possible parameter values:
param = OK if the command is forwarded
to execution
param = ER if the command is not
forwarded to execution
Request for enabling
digital output
*GETIMG# GETIMG param
Possible parameter values:
param = OK if the command is forwarded
to execution
param = ER if the command is not
forwarded to execution
Request for taking
picture (if the camera is
connected)
*CLRDOUT param#
Param=0
Param=1
Param=0,1
CRLDOUT param
Possible parameter values:
param = OK if the command is forwarded
to execution
param = ER if the command is not
forwarded to execution
Request for enabling
digital output
*GETDOUT# DOUT 0=1 1=0
где: output_number=output_state
Request for state of
digital output
*CONNECT# CONNECT CS_address:port Request for establishing
connection of Terminal
with CS
*GETLINK# LINK # LINK ip4_CS_address:port
date_and_time
Request for status of
connection to CS
Command Designation
Command text in SMS Reply to a command in SMS
77
SMS Commands