*GETINFO# INFO DID=deviceID
HW=hardware_code_version
BL=bootloader_version
FW=firmware_version
REC=number_of_records_in_archive
IMEI=GSM_modem_unique_identifier
Request for state of
terminal
*RESET# RESET param
Possible parameter values:
param = OK if the command is forwarded
to execution
param = ER if the command is not
forwarded to execution
Reset of terminal
*GETSTAT# STAT terminal_date_and_time
GPS=position as per GPS
SPD=speed
IGN=ignition_state
L1=fuel_level:sensor_state
L6=fuel_level:sensor_state
Fuel level sensor state codes LLS/LLS-AF:
• 0 - disabled;
• 1 - not ready;
• 2 - ready, , frequency 20 - max Hz;
• 3 - error, frequency 0 - 19 Hz;
Request for vehicle
state
*SETPWDID vid pwdid#
vid - identification of
Terminal;
pwdid -
password/identification.
SETPWDID
ERRID/ERRNulPWD/ERRAlrSet/PWD:pwdid
OK
Setting parameter
“Password”
Command Designation
Command text in SMS Reply to a command in SMS
To Next Page
Loading...
