241
Multiple Address Monitoring
00000
00000
TIM 000
T000
0100
00000 T000
0100
00001 T000
0100
00001 T000
OFF 0100
D000000001 T000
^OFF 0100
D000000001 T000
10FF^ OFF 0100
T000D000000001
0100 10FF^ OFF
D000000001
10FF^ OFF
0001
OFF
00000
CONT 00001
00000
CHANNEL DM 0000
0000000001
S ONR OFF
Indicates Force Reset
in operation.
Indicates Force Set
in operation.
Cancels monitoring of
leftmost address
Monitor operation
canceled
7-1-2 Forced Set/Reset
When the Bit/Digit Monitor operation is being performed and a bit, timer, or
counter address is leftmost on the display, PLAY/SET can be pressed to turn
ON the bit, start the timer, or increment the counter and REC/RESET can be
pressed to turn OFF the bit or reset the timer or counter. Timers will not oper-
ate in PROGRAM mode. SR bits cannot be turned ON and OFF with this op-
eration.
Monitoring Operation and Modifying Data Section 7-1
To Next Page
Loading...
