258
Restoring in progress
END reached
Restored up to END
Stop restoring using CLR
Comparison in progress
END reached
Stop comparison using CLR
Compared up to end of tape
00000
00000MT
UM:0 DM:1
00000MT
FILE NO.00000000
00345MT PLAY
FILE NOâ86031400
00420MT PLAY
FILE NOâ86031400
04801MT PLAY
END (01)(05.6KW)
04801MT DISCONTD
END (01)(05.6KW)
05789PLAY END
END (01)(05.6KW)
00345MT VER
FILE NOâ86031400
01420MT VER
FILE NOâ86031400
04801MT VER
END (01)(05.6KW)
04801MT DISCONTD
(05.6KW)
05789VER OK
END (01)(05.6KW)
00000MT
FILE NO.86031400
00000MT
START ADDR 00000
00000MT
START ADDR 00345
7-2-3 Saving, Restoring, and Comparing DM Data
The procedures for saving, restoring and comparing DM area data are identi-
cal to those for Program Memory except that the DM area is specified and
start and stop addresses are not required. Cassette tape operations for DM
area data will be continued to the end of the DM area or the end of the cas-
sette tape unless CLR is pressed to cancel. Refer to the relevant operation in
Example
Program Backup and Restore Operations Section 7-2
To Next Page
Loading...
