Appendix CProgramming Console Operations
319
Operation/Description Modes* Key sequence
Instruction Insert and
Instruction Delete
The displayed instruction can be de-
leted, or another instruction can be
inserted before it. Care should be tak-
en to avoid inadvertent deletions as
there is no way of recovering the in-
structions other than to re-enter
them. When an instruction is deleted
all subsequent instruction addresses
are automatically adjusted so that
there are no empty addresses, or in-
structions without addresses.
P
INS
At the desired position
in program:
DEL
Instruction
currently
displayed
[Enter new
instruction]
Insert
Delete
Program Check
Once a program has been entered, it
should be checked for errors. This
program check can be used to search
for three levels of syntax errors. De-
tails of the errors covered by each
level are given in the relevant manu-
als. The address where the error was
generated will also be displayed.
P
CLR
SRCH
A
0
B
1
C
2
SRCH
SRCH
CLR
Press SRCH to find
next error.
Cancel
(0, 1, 2: check levels)
Error Message Read
Displays error messages in se-
quence with most severe messages
displayed first. Press monitor to ac-
cess remaining messages. In PRO-
GRAM mode, pressing MONTR
clears the displayed message from
memory and the next message is dis-
played.
R P M
CLR
FUN MONTR MONTR
*Modes in which the given instruction is applicable: R = RUN, M = MONITOR, P = PROGRAM
To Next Page
Loading...
