Condition for Compliance with EU Directives
The immunity test condition for the CK3M-series Analog Input Units is as shown below.
Unit type Overall accuracy
Analog Input Unit +6%/-6%
To connect an Analog Input Unit, use 2-core twisted-pair shielded wire. Note that compliance was con-
firmed with the shielded wire grounded at both ends.
Conformance to UL and CSA Standards
The CK3M-series Units comply with UL and CSA standards.
For how to make your machine or device compliant with these standards, refer to the INSTRUCTION
SHEET
included with the product.
The INSTRUCTION SHEET provides usage conditions to make it compliant with the standards.
Conformance to KC Certification
When you use this product in South Korea, observe the following precautions.
This product meets the electromagnetic compatibility requirements for business use. There is a risk of
radio interference when this product is used in home.
Regulations and Standards
25
CK3M-series Programmable Multi-Axis Controller User's Manual Hardware (O036)
To Next Page
Loading...
Need help?
General
