Versions
PMAC firmware revisions are used to manage the motion control firmware in CK3M-series CPU Units.
The PMAC firmware revision is updated each time there is a change in motion control firmware. Even
when two CPU Units have the same model number, they will have functional or performance differen-
ces if they have different PMAC firmware revisions.
Checking Versions
You can check the PMAC firmware revision in Power PMAC IDE.
Checking with Power PMAC IDE
1 Connect the CK3M-series CPU Unit and Power PMAC IDE online.
2 Input vers to the terminal window
.
The firmware revision is displayed on the command line.
Versions
26
CK3M-series Programmable Multi-Axis Controller User's Manual Hardware (O036)
To Next Page
Loading...
