Omron fh series Operation Manual

1 - 7
1 Overview
Vision System FH Series Operation Manual for Sysmac Studio (Z343)
1-2 Project Management
1
1-2-2 Project Data Handling in Different System Configurations
Precautions for Correct Use
The data that the NJ/NX-series Controller manages and the data that the FH sensor controller
manages are handled separately on Sysmac Studio except for the I/O Map data that the
NJ/NX-series Controller manages. The I/O Map is associated to the system data that the FH
sensor controller manages. Because of this, the information in the I/O Map will be updated and
changed after editing the data that the FH sensor controller manages (i.e., the settings data for
the FH sensor controller).
Configurations and Setup
Configurations and
Setup
EtherCAT
CPU/Expansion Racks
Data
System data
Tool data
Tasks
I/O Map
Controller Setup
Task Setup
Event Setup
Motion Control Setup
Cam Data Settings
Scene group data
Data that the NJ/NX-series Controller manages
Data that the FH sensor controller
manages
Project data

Omron fh series Specifications

General

Type	Machine Vision System
Series	FH Series
Power Supply	24 VDC
Storage Temperature	-20 to 60°C
Humidity	35 to 85% RH (non-condensing)
Image Sensor	CMOS
Processing Speed	High-speed processing
Connectivity	Ethernet
I/O	Digital I/O
Operating System	Embedded OS
I/O Ports	Ethernet, USB