Omron fh series Operation Manual

3 Connecting with a Vision Sensor
3 - 12
Vision System FH Series Operation Manual for Sysmac Studio (Z343)
3-5 Logging in to a Registered User's
Account
If you have an account registered for an FH vision sensor, you will need to log in to the registered user
account whenever you establish an online account with the relevant FH vision sensor. Log in using the
user account for the UG0 group.
1 Establish an online connection with a vision sensor.
Establish an online connection with an FH vision sensor.
For details, refer to 3-2 Establishing an Online Connection with a Vision Sensor on page 3-4.
2 Log in to your account.
If you have a user account registered for an FH vision sensor that is online, the below login
screen will appear. Enter the user account for the registered account for the UG0 group and
then select [OK].
Precautions for Correct Use
This function becomes available when the user name of the account for the FH vision sensor is
changed from default settings.
The default [User name] and [Password] are both "Administrator."

Omron fh series Specifications

General

Type	Machine Vision System
Series	FH Series
Power Supply	24 VDC
Storage Temperature	-20 to 60°C
Humidity	35 to 85% RH (non-condensing)
Image Sensor	CMOS
Processing Speed	High-speed processing
Connectivity	Ethernet
I/O	Digital I/O
Operating System	Embedded OS
I/O Ports	Ethernet, USB