Omron fh series Operation Manual

3 - 11
3 Connecting with a Vision Sensor
Vision System FH Series Operation Manual for Sysmac Studio (Z343)
3-4 Ending a Connection with a Vision Sensor
3
3-4-1 Ending a Connection in the Sensor Connection Screen
3-4 Ending a Connection with a Vision
Sensor
End the connection with a sensor currently connected with an online connection and switch to the
offline state.
Additional Information
You can also check and edit settings data while the sensor is offline.
Open the sensor connection screen and then click the [Disconnect] button of [Online] - [Sensor connec-
tion].
Right-click the type name in the Multiview Explorer and select [Offline] from the menu.
3-4-1 Ending a Connection in the Sensor Connection Screen
3-4-2 Ending a Connection in the Multiview Explorer

Omron fh series Specifications

General

Type	Machine Vision System
Series	FH Series
Power Supply	24 VDC
Storage Temperature	-20 to 60°C
Humidity	35 to 85% RH (non-condensing)
Image Sensor	CMOS
Processing Speed	High-speed processing
Connectivity	Ethernet
I/O	Digital I/O
Operating System	Embedded OS
I/O Ports	Ethernet, USB