Omron fh series Operation Manual

Manual Structure
2
Vision System FH Series Operation Manual for Sysmac Studio (Z343)
Special information in this manual is classified as follows:
Precautions on what to do and what not to do to ensure safe usage of the product.
Precautions on what to do and what not to do to ensure proper operation and performance.
Additional information to read as required.
This information is provided to increase understanding or make operation easier.
Information on differences in specifications and functionality for CPU Units with different unit
versions and for different versions of the Sysmac Studio is given.
Note References are provided to more detailed or related information.
• For descriptions of the Controller terms that are used in this manual, refer to information on terminol-
ogy in NJ/NX-series CPU Unit Software User’s Manual (Cat. No. W501) and NJ/NX-series CPU Unit
Hardware User’s Manual (Cat. No. W500).
• For descriptions of the FH/FZ5 Sensor controller terms that are used in this manual, refer to informa-
tion on terminology in Vision System FH/FZ5 series User's Manual (Cat. No. Z365).
Special Information
Terminology
Precautions for Safe Use
Precautions for Correct Use
Additional Information
Version Information

Omron fh series Specifications

General

Type	Machine Vision System
Series	FH Series
Power Supply	24 VDC
Storage Temperature	-20 to 60°C
Humidity	35 to 85% RH (non-condensing)
Image Sensor	CMOS
Processing Speed	High-speed processing
Connectivity	Ethernet
I/O	Digital I/O
Operating System	Embedded OS
I/O Ports	Ethernet, USB